Dynamic Information

① Coarse adjustment. Loosen the 4 front nuts and their pressure plates of the tie rod to make the adjustment plate move backward. At this time, the rear end of the sprocket nut is tightly fixed on the rear pressure plate of the adjustment nut of the adjustment plate, thereby eliminating the gap between the sprocket nut and the rear pressure plate. At the same time, since the pressure plate of the front nut of the tie rod is loosened, the tie rod moves forward under the drive of the reaction force of the sprocket nut, and the gap between the front nut and the fixed plate will increase. When it is determined that all 4 tie rods move forward (the gap between the 4 front nuts and the fixed plate increases), tighten the front nut with uniform force, press the front nut pressure plate, and complete the coarse adjustment of the parallelism between the moving plate and the fixed plate.

How to choose a beverage bottle blowing machine? For many newcomers to the plastic bottle industry, there is a lot of knowledge that needs to be understood and learned before purchasing a beverage bottle blowing machine, and it is necessary to purchase it according to one's own needs. The more expensive the bottle blowing machine is, the better it is, but it may not be suitable for you. Because there are many factors involved in the early stage of bottle blowing machine consumption, only by finding the right one can it be used to the greatest extent and produce better benefits.