What are the ways to improve plastic machinery plasticization and extrusion?

The effect of the machine on the products operated by different technicians is different, which is different from the value generated by the same thing placed in the hands of different people. We can't just take machine-based production as a matter of course. In the production process, we will understand their working process, the operation status of the machine in various time periods and the impact of various different configuration materials on the performance of the machine. Only when we master these principles do we call it Be a professional.

Some plastic machinery is only suitable for brand new primary color granules. When the return material exceeds 30% of the product proportion, the extrusion volume is reduced by 20% to 30%; in the product proportion of the toner material When the dosage is large, the extrusion volume is reduced by 50% to 60%. Considering that the extrusion efficiency is too low, and the phenomenon of equal material for a long time, resulting in a long cycle period, no matter how good the other functions and performance of the blow molding machine, it has seriously affected the production efficiency, resulting in higher production costs. In particular, double-station hollow blow molding and large hollow blow molding machines cannot fully exert their functions due to the large amount of storage required and the long waiting time. The use of masterbatch particles instead of toner materials in the raw materials is better. But for blow molding machine users, the first is the high cost of using masterbatch particles, and the second is that there are many types of hollow plastic products with a small amount. It is impossible to use masterbatch particles instead of toner materials for every product.

Improving the working performance of the machine is to create more benefits for the enterprise. We, as every employee of the enterprise, must treat this work with such thinking. As Karls Ding Machinery, as the earliest plastic machinery manufacturer in Zhangjiagang, we assure all customers here As long as we produce machinery, we not only guarantee after-sales, but I will also provide professional technical instructors to give technical guidance to the company so that the products can play a better performance. Create more value for the enterprise.

These points are summarized by our technology and hope can help you:

1. Due to the proportion of product ingredients using recycled materials and toner-containing materials, the extrusion efficiency is low, which seriously affects the production of some products. Therefore, it is recommended that blow molding machine manufacturers consider how to improve the use of toner-containing materials for plastic machinery when developing blow molding machines. Plasticizing and extruding ability of materials and recycled materials.

Second, optimize the structure of the head runner: Some runners have two dead spots on the mold line of the hollow blow molded products with low and light colors due to the dead angle of the structure. When producing light-colored products such as primary colors, yellows, and milky whites, it is required that the hollow blow-molded products produced have no other coloring, and the inside of the machine head must be cleaned very cleanly. However, the total time for washing the machine is up to 12-18 hours, sometimes even longer. The time for washing the stains is about 2/3 of the total washing machine time, which greatly increases the cost of changing the color of the washing machine. If the washing machine frequently changes color, it is even overwhelmed.